Quickstart
Get FMtribe onto your FM-1 and making sound in five minutes. This build has the synth voice, the LFO, the drums and the step sequencer.
1Try it first
Open the emulator. It runs the same code as the FM-1, with sound. Click the keys, or play your computer keyboard. Nothing needs installing.
2Install
- Use Chrome or Edge on a computer. Safari and Firefox don't have Web MIDI.
- Connect the FM-1 to the computer with a USB-C data cable, and switch it on.
- Open the installer, press Connect, and allow MIDI when the browser asks.
- Press Install and wait. Don't unplug the cable while it writes. The FM-1 restarts on its own.
To go back to M-VAVE's firmware, or to another one, open the same installer and use its last section.
3Play
Press a page button, then turn K1 to K4 to edit that page. Press the button again for its next page; the header shows which one, such as VCF VCA 2/2. FMtribe starts on HOME.
| Page (button) | K1 | K2 | K3 | K4 |
|---|---|---|---|---|
| HOME 1/2 (HOME) | LEVEL | RHYTHM | CUTOFF | PEAK |
| RANGE MOTION 2/2 (HOME) | RANGE | MOTION | ||
| VCO 1/2 (ENV) | NOISE | RANGE | ||
| VCF VCA 2/2 (ENV) | CUTOFF | PEAK | LEVEL | EG |
| LFO (LFO) | RATE | INT | TARGET | MODE |
| DRUMS (ARP) | RHYTHM | BD DECAY | SN DECAY | HH DECAY |
| STEP 1/2 (SEQ) | TEMPO | SWING | STEPS | GATE |
| EDIT 2/2 (SEQ) | STEP | NOTE | GATE | ON |
| MIDI 1/3 (GLO) | SYNTH CH | DRUM CH | SYNC | CLOCK OUT |
| GLOBAL 2/3 (GLO) | BLE MIDI | KEY LIGHT | GLOW | PREVIEW |
| DEVICES 3/3 (GLO) | DEVICE |
On every page, OCT− and OCT+ set the octave and SELECT the VCO's wave. On the SEQ pages, SELECT moves the step cursor and PRESET picks the part (SYNTH, BD, SN, HH). On LFO, ALGO sets the LFO's wave.
| Do this | And |
|---|---|
| Play the keys | The synth sounds. Each new key starts its envelope again. |
| On DRUMS (ARP), the F♯3 G♯3 A♯3 black keys | Bass drum, snare, hi-hat. Every other key still plays the synth. |
| PLAY | Start or stop the pattern. |
| REC, then PLAY | Record: the keys land on the nearest step; the DRUMS pads record the drums. |
| FX (or F♯5), then a DRUMS pad | ROLL: the pad rolls its drum while held. ALGO sets the rate. |
| Turn MASTER | Volume. |
| SAVE | Keeps your settings for the next start (it lights when there's something to save). |
A drum pattern in a minute: press SEQ. On STEP the keys are the monotribe's step row: every other white key (F3, A3, C4, E4, G4, B4, D5, F5) is a step, and their lights are the step LEDs. Press F♯3 to pick the bass drum and press white keys to switch its steps on. G♯3 picks the snare, A♯3 the hi-hat and C♯4 the synth. Press PLAY.
Gate times: while it plays, hold F♯4 (GATE TIME) and touch the white keys: left is short, right is long. The manual's "Setting gate times" has the rest.
4Connect
- USB-C: the FM-1 is a MIDI device and a sound card. Record it from the input "FMtribe FM-1".
- Bluetooth MIDI: on a Mac, open Audio MIDI Setup › Window › Show MIDI Studio, click the Bluetooth button, then Connect next to FM-1. On an iPad or iPhone, connect from a music app's Bluetooth MIDI settings. Switch Bluetooth off or on with BLE MIDI on GLOBAL 2/3 (GLO).
- A Bluetooth keyboard: put it in pairing mode, press GLO until DEVICES 3/3 shows, turn K1 to pick it, press SAVE.
- Screen mirror: open the Mirror page in Chrome or Edge with the FM-1 on USB, and press Connect. Press Control to play it from the page.
5If something goes wrong
- No sound: turn MASTER up, and LEVEL and CUTOFF (VCF VCA, ENV 2/2). A DECAY note fades after about a second; set EG to GATE there for held notes.
- The installer can't find the FM-1: close other programs using its MIDI port, try another cable (some are charge-only), and allow MIDI in the browser.
- The FM-1 doesn't start after an install: after two failed starts it opens in SAFE MODE, where the installer can still reach it. Install again, or put the stock firmware back.
The manual has the details.